Auralex - STUDIOFOAM - Home Office Kit Charcoal (20-Pack) - Authentic - NIB

Description

Auralex - STUDIOFOAM - Home Office Kit Charcoal (20-Pack) - Authentic - NIB
UPC: 818105015641
AVAILABILITY: Ships in 7-9 Business Days
Description
The Auralex Home Office Kit™ offers you a starting point to improve conference call and eLearning audio quality for home offices. With the increase in work and learn from home, this kit helps improve both the sound quality from your microphone as well as the sound coming out of your computer speakers™. The Home Office Kit is designed to immediately improve the acoustic performance of the typical vocal range in a small to medium-sized office. The kit enables significantly improves speech intelligibility, enabling better communication and understanding.
The Home Office Kit contains 20 SonoFlat™ Panels, each 12” x 12” x 2”, which can be mounted to standard drywall with the included EZ-Stick Pro™ Tabs. Be advised that the EZ-Stick Pro™ Tabs are designed for permanent installations and may damage drywall and painted surfaces when removed.
Kit Includes:
(20) 2”x12”x12” SonoFlat® panels
(40) EZ-Stick Pro™ Tabs
STUDIOFOAM®:
SonoFlat™ Panels offer great absorption of mid- to high-frequencies, with an .95. The edges are beveled, contributing to an elegant look not normally associated with acoustical foam. The panels can be installed easily and arranged in a multitude of attractive patterns.
SonoFlats™ offer a unique, sophisticated look and a cost-effective choice for accurate sound.
INSTALLATION:
In order to maximize performance, place the majority of SonoFlat™ panels close in proximity to the laptop of microphone. Where possible, try to make the panel installation symmetrical on opposing walls. The most important areas to place the panels are points of first reflection, thus around and to the sides of the computer or microphone. It is a good idea to temporarily place the panels and move them around a bit to find the location that works best for you.
Mark the target position on your wall where the product will be mounted using small pencil marks, pieces of masking tape or any similar non marring method. Be sure the surface where the EZ-Stick Pro™ Tabs will adhere is free of dirt, dust or other oily contaminants by spot cleaning with rubbing alcohol. (See the EZ-Stick Pro™ Tab User Guide)
Sonoflat™ panels use (2) EZ-Stick Pro™ Tabs each, placed on diagonal corners. The EZ-Stick Pro™ tabs can also be cut in half and placed on all four back corners.
Remove one of the release layers on the EZ-Stick Pro™ Tabs, and affix it to the rear side of the products perimeter, usually near the corners. Apply firm pressure, and wait about 5 minutes for the adhesive to set.
Remove the second layer of the release paper from each of the EZ-Stick Pro™ Tabs, carefully orient the panels position prior to contact with the wall, then press in place with moderate pressure.